13mm thickness, Blue wear resistanttop layer of 4mm, grey elastic bottom layer of 9mm. Embossing the moldingin our factory for top and bottom layer.
Thicknesscould be made from 8-20mm, width from 0.9m-1.27m, length is 15.2-15.4m
Professional athletic track and field floor
The prefabricated rubber athletic track surfaces are globally recognized to be the replacement of the traditional PU(polyurethane) ones.The one-time embossing workmanship makes the perfect quality and advantage of strong wear-resistance,anti-slippery,shocking absorbent,excellent elasticity,anti-aging and long lasting durability.And further,they do not have the problems of the rubber granules coming off the surfaces.The surfaces could be recycled after its lifespan.They have passed the tests made by IAAF to be completely environment protected products.
NovoTrack has a well trained professional installation team which has 17 years of experiences for the stadium construction of Olympic Games and National Games.We provide the most suitable project according to the requirements of every individual customer and field.We provide free installation instructions. If necessary, we provide on-site installation training services. Help you become more competitive in your market.
1.The foundation should be smooth enough and without sand.
Grinding and leveling it.Be sure it does not exceed±3mmwhen measured by3m straightedges.
2.According to the daily construction plan,put the prefabricated rubber running track on the planned position.
Draw the basic line according to the drawing.
3.Stir the adhesive as required which will be used within one hour
4.Take the stirred glue to the required area, scratch the glue 2-3 meters equably with toothed scrapers.
5.Put the rubber roll materials on the fixed po sition,unfold it to be connected with adhesive.
6.Use a special trowel to forcefully flatten the running track surfaces.
Eliminate the air bubbles remaining in the bonding process of the roll and the base.
7.The gap should be fixed by nails.
8.After fixed by nails,pressed by bricks for better connection.
9.Clear the athletics track
10.After finishing the installation, check the whole field,any gap filled with adhesive to be smooth. Then clean the whole field,keep it clean.
11.Draw the line according to the drawing.
12.Lengthen the straight track line,and then make the running track number.
We are providing better and more comfortable sports surroundings for the players.The main material that we are using is natural rubber and the track surfaces are made into two layers.The upper layer is a bit harder than that of the lower and the waffle pattern forming 8400 cancave air cushions per each square meter after it glued onto the asphalt basement,thus further enhancing its anti-slippery,elasticity and shocking absorbent,making less harms for the players.
Safety & Eco-friendly
The unique surface undulation and concave bottom air cushion design provide a suitable shock absorption and energy feedback system, which can effectively improve sports performance while ensuring sports safety.
The flooring does not contain any toxic heavy metals and harmful chemical substances, and its physical and chemical properties are in full compliance with national standards and environmental protection requirements. This is indeed for the physical and mental health of sports athletes. The rubber surface layer can still be recycled after its service life expires. Save land resources.
NovoTrack Team
Tianjin NovoTrack Rubber products Co.,Ltd. was set up in 2004 and total investment is 20M RMB,manufacturing especially various kind sports floorings.We have installed millions of square meters of our track surfaces at many city sports centers,university campus,high schools and so on.
We are qualified with ISO-9001,ISO14000 and ISO18000.
NovoTrack-The supplier of the 11th,12th,13th and 14th China National Games.
Our prefabricated rubber track surface is certifacted by World Athletics.